Photo-deposition of ZnO/Co3O4 core-shell nanorods with p-n junction for efficient oxygen evolution reaction

Journal of Solid State Electrochemistry - Co3O4 has attracted extensive interests as a non-noble-metal electrocatalyst of oxygen evolution reaction, which is critical to many electrical energy...     

Enantioselective C2-Alkylation of Indoles through a Redox-Relay Heck Reaction of 2-Indole Triflates

A palladium-catalyzed enantioselective redox-relay Heck reaction of 2-indole triflates and disubstituted alkenes is reported. This process combines readily available indole triflates with a variety of alkenes to afford a range of indole derivatives bearing a stereocenter adjacent to C2. Enantioselectivity is achieved through use of a simple pyridine-oxazoline ligand. Tuning the electronics of the indole, through judicious choice of N-protecting group, is required to ensure selective β-hydride elimination away from the indole core. Utility of this method is highlighted in a modular formal synthesis of an S1P₁ agonist precursor developed by Merck.     

Directing-Group-Free C7-Alkylations of N-Alkylindoles Mediated by Cationic Zirconium Complexes: Role of Brønsted Acid for Catalytic Manifold

Highly position selective alkylations of N-alkylindoles at C7-positions have been enabled by cationic zirconium complexes. The strategy provides a straightforward access to install alkyl groups at C7-positions of indoles without a complex directing group. Mechanistic studies provided support for the importance of Brønsted acids in the catalytic manifold.     

Bis-tridentate IrIII Phosphors Bearing Two Fused Five-Six-Membered Metallacycles: A Strategy to Improved Photostability of Blue Emitters

Iridium complexes bearing chelating cyclometalates are popular choices as dopant emitters in the fabrication of organic light-emitting diodes (OLEDs). In this contribution, we report a series of blue-emitting, bis-tridentate Ir^III complexes bearing chelates with two fused five-six-membered metallacycles, which are in sharp contrast to the traditional designs of tridentate chelates that form the alternative, fused five-five metallacycles. Five Ir^III complexes, Px-21 – 23 , Cz-4 , and Cz-5 , have been synthesized that contain a coordinated dicarbene pincer chelate incorporating a methylene spacer and a dianionic chromophoric chelate possessing either a phenoxy or carbazolyl appendage to tune the coordination arrangement. All these tridentate chelates afford peripheral ligand–metal–ligand bite angles of 166–170°, which are larger than the typical bite angle of 153–155° observed for their five-five-coordinated tridentate counterparts, thereby leading to reduced geometrical distortion in the octahedral frameworks. Photophysical measurements and TD-DFT studies verified the inherent transition characteristics that give rise to high emission efficiency, and photodegradation experiments confirmed the improved stability in comparison with the benchmark fac-[Ir(ppy)₃] in degassed toluene at room temperature. Phosphorescent OLED devices were also fabricated, among which the carbazolyl-functionalized emitter Cz-5 exhibited the best performance among all the studied bis-tridentate phosphors, showing a maximum external quantum efficiency (EQE_max) of 18.7 % and CIE_x,y coordinates of (0.145, 0.218), with a slightly reduced EQE of 13.7 % at 100 cd m⁻² due to efficiency roll-off.     

Proton conductivity study on three CS/IL@fle-MOF membranes

The low-cost, high specific surface area and porosity, controlled pore size, and chemical properties of metal–organic framework (MOF) materials have attracted much attention in the exploration of proton conduction. The method of chemically modifying MOF structures or introducing conductive medium into the holes can effectively improve the proton conductivities of the materials. Here, the structural tunability of ionic liquid (IL) and flexible MOF (fle-MOF) materials are matched to give full play to the conductivity of IL, the framework support, and the microporous effect of MOFs, which achieves the synergistic effect of performance and expands the temperature range of proton transfer. Three kinds of CS/IL@fle-MOF membranes were prepared by combining three fle-MOFs with 1-carboxymethyl-3-methylimidazole (CMMIM) in different proportions to obtain 15 pieces of membranes. The comparative analyses show that CS/IL@fle-MOF membranes have excellent proton conduction performance at a wider temperature range (263–353 K) and lower relative humidity (75% RH). Among them, the proton conductivities of CS/CMMIM@MIL-88A-25% and CS/CMMIM@MIL-88B-125% are up to 1.33 and 1.42 S cm⁻¹ at 75% RH and 353 K, respectively; whereas those of CS/CMMIM@MIL-53(Fe)-75% and CS/CMMIM@MIL-88B-125% reach up to 2.1 × 10⁻³ and 1.28 × 10⁻³ S cm⁻¹ at 75% RH and 263 K, respectively. The E_a of CS/CMMIM@fle-MOFs is in the range of 0.1–0.5 eV, suggesting that the proton transport follows predominantly the typical Grotthuss transfer mechanism. The results of this study indicate that the CS/CMMIM@fle-MOF membranes combinations offer great potential for the design of composite porous proton-conducting materials.     

熔盐法合成钛酸锂钾片晶及形貌控制

在碳酸钾、碳酸锂和二氧化钛的混合原料中加入熔盐氯化钾,通过高温煅烧一步制备出钛酸锂钾片晶( K0.8 Li0.27Ti1.73O4, KLTO).通过控制熔盐的添加方式以及煅烧工艺(升温速率、煅烧时间)使材料的形貌朝着二维方向生长,并利用XRD和SEM等手段进行表征.分析发现:过快的升温速率或者较短的煅烧时间都会使材料朝三维方向生长成球状或者块状,反之则会使材料趋向一维方向生长成棒状;同时在煅烧温度达到一定值时再加入熔盐则更有利于片晶的生成.最终得到KLTO片状形貌的最佳控制工艺为:先以300 ℃/h升温至800 ℃后,再加入质量分数为40;的KCl熔盐,接着将升温速率变为200 ℃/h,加热至950 ℃,并在此温度下煅烧3 h.     

高能量密度型锂离子电池正极材料LiNi0.5Mn1.5O4改性的研究进展

尖晶石镍锰酸锂(LiNi0.5Mn1.5O4)具有工作电压高、结构稳定、适合快充快放等特性成为高能量及高功率密度型正极材料的有力竞争者.结合了近几年的研究报道,介绍了LiNi0.5 Mn1.5O4的结构、制备方法、改性方法及其应用前景,着重介绍了LiNi0.5 Mn1.5O4材料晶型结构对其性能的影响,并指出该材料目前存在的问题和研究重点.     

Decay rate for viscoelastic wave equation of variable coefficients with delay and dynamic boundary conditions

In this paper, we consider a viscoelastic wave equation of variable coefficients in the presence of past history with nonlinear damping and delay in the internal feedback and dynamic boundary conditions. Under suitable assumptions, we establish an explicit and general decay rate result without imposing restrictive assumption on the behavior of the relaxation function at infinity by Riemannian geometry method and Lyapunov functional method.     

Hybrid numerical method for wall-resolved large-eddy simulations of compressible wall-bounded turbulence

Acta Mechanica Sinica - Bogies are responsible for a significant amount of aerodynamic resistance and noise, both of which negatively affect high-speed train performance and passenger comfort. In...     

A Factor-GARCH Model for High Dimensional Volatilities

Acta Mathematicae Applicatae Sinica, English Series - This paper proposes a method for modelling volatilities (conditional covariance matrices) of high dimensional dynamic data. We combine the...